Recent Changes - Search:

English.Pftek History

Hide minor edits - Show changes to markup

September 13, 2013, at 11:57 PM by 77.119.132.186 -
Changed line 354 from:

Check the Shroomery Contamination FAQ for more information on possible contaminations in mushroom culture.

to:

Check the Shroomery Contamination FAQ for more information on possible contamination in mushroom culture.

Changed lines 379-380 from:

The fruiting of the cakes can be accomplished in any sort of container that can be loosely sealed and has at least one translucent side, preferably on the top. Suitable containers are a plastic bucket, rubbermaid container, terrarium, aquarium...
Put an 1/2 inch layer of moistened perlite(pdf) or expanded clay pelets or even a wet paper towel at the bottom of the container and birth the cakes onto this layer by letting them slide from the jar upside down.

to:

The fruiting of the cakes can be accomplished in any sort of container that can be loosely sealed and has at least one translucent side, preferably on the top. Suitable containers are a plastic bucket, Rubbermaid container, terrarium, aquarium...
Put an 1/2 inch layer of moistened perlite(pdf) or expanded clay pellets or even a wet paper towel at the bottom of the container and birth the cakes onto this layer by letting them slide from the jar upside down.

Changed line 399 from:

Handle the cakes as little as possible but when you do it allways wash your hands thouroughly beforehand.

to:

Handle the cakes as little as possible but when you do it always wash your hands thoroughly beforehand.

Changed line 401 from:

This simultanious maturation of all mushrooms is called a flush.

to:

This simultaneous maturation of all mushrooms is called a flush.

September 13, 2013, at 11:44 PM by 77.119.132.186 -
Changed lines 98-99 from:

http://ecx.images-amazon.com/images/I/31TCK91H9RL._SL500_AA252_.jpg
Brown Rice Flour

to:

http://ecx.images-amazon.com/images/I/41jPsPLVTfL._SL500_AA280_.jpg
Bob's Red Mill Rice Flour Brown

September 13, 2013, at 11:40 PM by 77.119.132.186 -
Added lines 75-77:

http://ecx.images-amazon.com/images/I/41dEFM5syuL._SL500_AA280_.jpg
Espoma VM8 8-Quart Organic Vermiculite

February 22, 2013, at 05:20 AM by 192.102.17.160 -
Changed line 377 from:

Put an 1/2 inch layer of moistened perlite(pdf) or expanded clay pelets or even a wet paper towel at the bottom of the container and birth the cakes onto this layer by letting them slide from the jar upside down.

to:

Put an 1/2 inch layer of moistened perlite(pdf) or expanded clay pelets or even a wet paper towel at the bottom of the container and birth the cakes onto this layer by letting them slide from the jar upside down.

Changed line 101 from:

If you are unable to find BRF you can also use whole wheat- or rye flour with similar results. Ground millet or ground millet based birdseed also work good.

to:

If you are unable to find BRF you can also use whole rye flour, ground millet or ground millet based birdseed with similar results..

Changed line 107 from:

Water used for the substrate preparation should have drinking water quality. Tap water is usually ok, but if you're not sure about it, better use bottled drinking water or mineral water.

to:

Water used for the substrate preparation should have drinking water quality. Tap water is usually OK, but if you're not sure about it, better use bottled drinking water or mineral water.

Deleted lines 76-77:

vermiculite @ ebay
perlite @ ebay

Changed line 53 from:

Materials

to:

Materials

Changed line 68 from:

Online sources for vermiculite

to:

Online sources for vermiculite

Changed line 71 from:

Amazon

to:

Amazon

Changed line 75 from:

Ebay

to:

Ebay

Changed line 96 from:

Amazon

to:

Amazon

Changed lines 100-101 from:

BRF is also available at Ebay

to:

BRF is also available at Ebay:

Changed line 108 from:

Water

to:

Water

Added lines 71-75:

Amazon

http://ecx.images-amazon.com/images/I/61Laa6Ai8PL._SL500_AA280_.gif
Hoffman A H #16002 8QT Vermiculite

Ebay

Added lines 95-100:

Amazon

http://ecx.images-amazon.com/images/I/31TCK91H9RL._SL500_AA252_.jpg
Brown Rice Flour

Changed lines 35-37 from:

A video of the PF-Tek for Simple Minds substrate preparation and inoculation to accompany the written tek

to:

(:youtube 3iFi3YrIo7o:)

Changed lines 126-127 from:

http://ecx.images-amazon.com/images/I/51%2BbbR5zipL._SL160_AA160_.jpg
Kerr 0500 wide mouth mason jar half pint, 8oz

to:

http://ecx.images-amazon.com/images/I/51%2BbbR5zipL._SL160_AA160_.jpg
Kerr 0500 wide mouth mason jar half pint, 8oz

Changed line 126 from:

http://ecx.images-amazon.com/images/I/51%2BbbR5zipL._SL160_AA160_.jpg

to:

http://ecx.images-amazon.com/images/I/51%2BbbR5zipL._SL160_AA160_.jpg

Changed lines 124-128 from:

You can use either canning jars (Ball, Kerr...) or drinking glasses, the only requirement is that they are tapered and without shoulders, so you can slide the cake out of it in one piece once it's colonized. Bigger jars take much longer to colonize and are not recommended.

to:

You can use either canning jars (Ball, Kerr...) or drinking glasses, the only requirement is that they are tapered and without shoulders, so you can slide the cake out of it in one piece once it's colonized. Bigger jars take much longer to colonize and are not recommended.

http://ecx.images-amazon.com/images/I/51%2BbbR5zipL._SL160_AA160_.jpg
Kerr 0500 wide mouth mason jar half pint, 8oz

Changed line 78 from:

www.hydroponics.com

to:

www.auroralighting.ca

Changed line 86 from:

Vermiculite is generally available in garden and hydroponic stores, in some regions also in pet shops.

to:

Generally you can get vermiculite in garden and hydroponic stores, in some regions also in pet shops.

Changed lines 73-74 from:

(:include English.EbayPerlite:)

to:

(:include English.EbayVermiculite:)

Changed line 37 from:
'+I made a video of the PF-Tek for Simple Minds substrate preparatihost:1203147291=84.119.34.128
to:

diff:1203147291:1203091236:=37c37
A video of the PF-Tek for Simple Minds substrate preparation and inoculation to accompany the written tek

Changed line 74 from:

(include English.EbayPerlite:)

to:

diff:1203091236:1203091188:=74c74
(:include English.EbayPerlite:)

Changed line 94 from:

(include English.EbayBRF:)

to:

(:include English.EbayBRF:)

Changed line 370 from:
to:

(:include English.EbayPerlite:)

Changed line 70 from:

Online sources for vermiculite and perlite

to:

diff:1203091188:1197824480:=70c70

Online sources for vermiculite

Added lines 73-74:

(include English.EbayPerlite:)

Deleted lines 76-79:

vermiculite @ Google
perlite @ Google
vermiculite @ Froogle
perlite @ Froogle

Changed lines 93-94 from:

BRF is also sometimes available online.

to:

BRF is also available at Ebay
(include English.EbayBRF:)

Deleted lines 96-97:

Google search for BRF
Froogle search for BRF

Added lines 370-371:

(host:1203091188=84.119.34.128

Changed lines 112-113 from:

Spores are microscopic so as long as you see at least a few specs in more or less clear water the syringe should have plenty of spores. Available through the internet, for instance

to:

Spores are microscopic so as long as you see at least a few specs in more or less clear water the syringe should have plenty of spores.


Available through the internet, for instance

Changed line 131 from:
to:
Drinking glass and jar
Changed line 152 from:
to:
Ingredients for the PF Tek
Changed line 158 from:
to:
Mixing the ingredients
Changed line 165 from:
to:
Water Wet vermiculite
Changed line 173 from:
to:
Wet vermiculite at field capacity
Changed line 179 from:

to:
Vermiculite brown rice flour Vermiculite brown rice flour stirring
Vermiculite brown rice flour stirred
Changed line 186 from:

to:

Changed line 193 from:
to:
Changed line 5 from:
to:
Changed line 16 from:
to:
Changed line 67 from:

(:cell:)

to:

(:cell:) Vermiculite

Changed line 101 from:

(:cell:)

to:

(:cell:)Brown Rice Flour

Changed line 119 from:
to:
Spore syringe
Deleted line 33:
Changed lines 37-39 from:
I made a video of the PF-Tek for Simple Minds substrate preparation and inoculation:

Watch it!

to:
I made a video of the PF-Tek for Simple Minds substrate preparation and inoculation:
Changed lines 289-290 from:

I made a video of the substrate preparation and inoculation:
http://www.youtube.com/watch?v=3iFi3YrIo7o

to:
I made a video of the PF-Tek for Simple Minds substrate preparation and inoculation:
Changed line 391 from:

Over a course of the bext 7-14 days the cakes will begin to pin(if the haven't began to pin in the jars yet) and the small mushrooms will grow big in a matter of 2-5 days and as soon the caps begin to open they can be harvested.

to:

Over a course of the next 7-14 days the cakes will begin to pin(if the haven't began to pin in the jars yet) and the small mushrooms will grow big in a matter of 2-5 days and as soon the caps begin to open they can be harvested.

Changed line 38 from:
I made a video of the F-Tek for Simple Minds substrate preparation and inoculation:
to:
I made a video of the PF-Tek for Simple Minds substrate preparation and inoculation:
Changed lines 38-39 from:

I made a video of the substrate preparation and inoculation:
http://www.youtube.com/watch?v=3iFi3YrIo7o

to:
I made a video of the F-Tek for Simple Minds substrate preparation and inoculation:

Watch it!

Deleted line 42:
Changed line 407 from:

It's crucial that you harvest all mushrooms, also the aborts, after the flush. This is most easily accomplished if you harvest the mushrooms off by gently twisting and tearing them off the cake with clean hands. Optionally you can dunk the cakes after each flush, this can increase the flush size significantly.

to:

It's crucial that you harvest all mushrooms, also the aborts, after the flush. This is most easily accomplished if you harvest the mushrooms off by gently twisting and tearing them off the cake with clean hands. Optionally you can dunk the cakes after each flush, this can increase the flush size significantly.

Added lines 236-237:

If you never used a pressure cooker before check out this document about the correct pressure cooker use.

Deleted line 240:

If you never have used a pressure cooker before check out this document about the correct pressure cooker use.

Added lines 34-42:

I made a video of the substrate preparation and inoculation:
http://www.youtube.com/watch?v=3iFi3YrIo7o

Changed lines 291-292 from:
The final, long version of the time lapse video of P. cubensis "Burma" mushrooms:
to:

I made a video of the substrate preparation and inoculation:
http://www.youtube.com/watch?v=3iFi3YrIo7o

Changed line 294 from:

http://www.youtube.com/watch?v=VhVcKWE00j0

to:
Deleted line 295:
Changed line 436 from:
to:
Deleted lines 33-42:

iff:1179737548:1179332999:=33a34,43

The final, long version of the time lapse video of P. cubensis "Burma" mushrooms:

http://www.youtube.com/watch?v=VhVcKWE00j0

Added lines 426-434:

There is an excelent video of a pf tek version now on youtube.
Let's Grow Mushrooms! pf tek part 1
Let's Grow Mushrooms! pf tek part 2
Let's Grow Mushrooms! pf tek part 3
Let's Grow Mushrooms! pf tek part 4

Changed lines 148-150 from:

For 12 jars, this amounts to:
=> 7 US cups vermiculite
=> 2 US cups brown rice flour

to:

For 6 jars, this amounts to:
=> 3.5 US cups vermiculite
=> 1 US cup brown rice flour

Changed line 159 from:

Put the required amount of vermiculite for all the jars of one batch (for instance 6 jars: 6 x 140 ml = 840 ml ) in a bowl.

to:

Put the required amount of vermiculite for all the jars of one batch (for instance 6 jars: 6 x 140 ml = 840 ml ~ 3.5 US cups ) in a bowl.

Changed line 180 from:

Now put the required amount of the BRF (for instance 6 x 40 ml = 240 ml) into the wet vermiculite at once and mix it in with the spoon. The goal is to uniformly coat the wet vermiculite particles with a layer of BRF.

to:

Now put the required amount of the BRF (for instance 6 x 40 ml = 240 ml = 1 US cup) into the wet vermiculite at once and mix it in with the spoon. The goal is to uniformly coat the wet vermiculite particles with a layer of BRF.

Changed line 186 from:

Fill the mixture in jars ½ inch (1cm) under the top. it's very important to fill the substrate in the jars without tapping it down at all. It should stay very airy and loose to provide optimum conditions for the growth of mycelium.

to:

Fill the mixture in jars ½ inch (1cm) under the top. It's very important to fill the substrate in the jars without tapping it down at all. It should stay very airy and loose to provide optimum conditions for the growth of mycelium.

Changed line 200 from:

Take a 5inch(12cm) wide stripe of aluminium foil and fold it in the middle.

to:

Take a 5in(12cm) wide stripe of aluminium foil and fold it in the middle.

Changed line 224 from:

Pour approximately 1inch (2.5cm) of water into the pressure cooker, don't put in too much water otherwise it will come into the jars and alter their water conauthor:1134144605=Anno

to:

Pour approximately 1in (2.5cm) of water into the pressure cooker, don't put in too much water otherwise it will come into the jars and alter their water content.

Added lines 1-393:

(:noautosections:)

====
(:table border=0 cellpadding=5 cellspacing=0 width=100% align=center:)
(:cell:)

(:cell:)
PF-Tek for Simple Minds
for the cultivation of grain - loving mushrooms
(Psilocybe cubensis)
( updated: November 19, 2017, at 07:08 AM )
dead link reports, comments and suggestions welcome any time

(:cell:)

(:tableend:)

====
The PF-Tek was developed and first made public in 1992 by www.fanaticus.com (mirror).
This tek made the cultivation of mushrooms at home feasible for complete beginners utilizing commonly available materials.
The growing method I describe here is based on the PF-tek but includes a few modifications that are time tested, and are, in my opinion, superior to the original PF-tek.
I strongly recommend you to read the original PF-Tek, if you haven't done so already, to see a different approach to some steps.

The PF-Tek for Simple Minds uses ½ pint (~240ml) canning jars or drinking glasses and a growing substrate made of vermiculite, brown rice flour and water. The substrate is prepared, sterilized and inoculated with mushroom spores. After the substrate is fully colonized the fruiting takes place in a humid container.

On the subject of cleanliness

By growing mushrooms indoors on a nutritious substrate, you create conditions than not only favor the growth of the mushrooms, but also favor the growth of a large number of other organisms, many of them hazardous to the health. To ensure that only the desired mushroom is grown, it is very important to assure cleanliness in all of the cultivation related procedures.

Before you work, wash your hands with (antibacterial) soap and warm water. Afterwards, wipe them dry and rub with Lysol or isopropyl-alcohol(iso-propanol). Keep the rooms where you do the inoculation and fruiting dust free and clean and don't bring in dirty clothing or shoes. Equally important is personal hygiene. Dirty hands, and even dirty hair, are a hotbed for all kinds of unwanted microorganisms which can destroy your cultivation project.

====

Materials

Most materials are easily avaliable at the local shops.

Vermiculite

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
Vermiculite is made from a naturally occurring mineral - mica.
Crushed mica containing water is heated and expands to a volume several times greater than that of the untreated mica.
Vermiculite is able to hold several times its own weight in water and it gives the substrate an airy structure.
Vermiculite is available in several grades, the middle and the middle-fine grade are most suitable for cultivation purposes.

(:cell:)
(:tableend:)

Online sources for vermiculite and perlite

USA
vermiculite @ ebay
perlite @ ebay
vermiculite @ Google
perlite @ Google
vermiculite @ Froogle
perlite @ Froogle

Canada
www.hydroponics.com

United Kingdom
www.gro-lite.co.uk

Australia
users.bigpond.net.au/nutriflo/

Vermiculite is generally available in garden and hydrophonic stores, in some regions also in pet shops.

Brown rice flour (BRF)

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
BRF is available in health food shops either already ground, sometimes though there is only whole brown rice available.
In this case you can grind the rice either in the shop or, if this option is not available, grind your own using an electrical coffee grinder.
BRF is best kept cool and dry for prolonged periods of time, since it can easily become rancid because of the fat content of its husk.
If you are unable to find BRF you can also use whole wheat- or rye flour with similar results. Ground millet or ground millet based birdseed also work good.
Google search for BRF
Froogle search for BRF

(:cell:)
(:tableend:)

Water

Water used for the substrate preparation should have drinking water quality. Tap water is usually ok, but if you're not sure about it, better use bottled drinking water or mineral water.

Spore syringe

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
A plastic syringe with needle attached containing 10cc -12cc suspension of mushroom spores in water.
The color of the suspension varies from completely translucent to slightly violet depending on the quantity of the spores in the solution.
Spores are microscopic so as long as you see at least a few specs in more or less clear water the syringe should have plenty of spores. Available through the internet, for instance

www.sporeworks.com
www.thehawkseye.com
and many more.

(:cell:)

(:tableend:)

Jars

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
The jars should have a content of around ½ pint (~240ml)
You can use either canning jars (Ball, Kerr...) or drinking glasses, the only requirement is that they are tapered and without shoulders, so you can slide the cake out of it in one piece once it's colonized. Bigger jars take much longer to colonize and are not recommended.
Shroomery FAQ: Where can I find supplies in the USA?
Shroomery FAQ: Where can I find supplies in the UK?

(:cell:)

(:tableend:)

====

Substrate preparation

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
For one ½ pint jar(~240 ml) you will need:
=> 140 ml vermiculite
=> 40 ml brown rice flour
=> some vermiculite to fill the jar to the top (app. 20 ml)
=> water

Note:
½pt(pint) = 1 cup = 236ml(milliliter) = 236cc(cubic centimeter) = 1/4 qt(quart)
The cups, pints and quarts are in the US liquid measuring system.

(:cell:n.jpg

(n.jpg

(:cellnr:)
Put the required amount of vermiculite for all the jars of one batch (for instance 6 jars: 6 x 140 ml = 840 ml ) in a bowl.

(:cell:)

(:cellnr:)
Pour water slowly over the vermiculite while stirring with a spoon.
Be careful to only put that much water in as it can be absorbed by the vermiculite. Stir it well so all the vermiculite is uniformly soaked with water.

(:cell width=350:)

(:cellnr:)
When you tilt the bowl you should see just a little water starting coming from the vermiculite.
This is when the correct water content is achieved.
If there is too much water in the bowl, pour the wet vermiculite in a strainer and let the excess water drain for a minute. Then the vermiculite will be at the field capacity, which is perfect.

(:cell:)

(:cellnr:)
Now put the required amount of the BRF (for instance 6 x 40 ml = 240 ml) into the wet vermiculite at once and mix it in with the spoon. The goal is to uniformly coat the wet vermiculite particles with a layer of BRF.

(:cell width=350:)


(:cellnr:)
Fill the mixture in jars ½ inch (1cm) under the top. it's very important to fill the substrate in the jars without tapping it down at all. It should stay very airy and loose to provide optimum conditions for the growth of mycelium.
Be careful not to leave any substrate on the upper edge of the jar. If you weren't careful enough and there are some substrate specks at the edge take a clean moist cloth and wipe the upper portion of the jar clean. Otherwise contaminants can start at those spots and work their way down into the jar.

(:cell width=350:)


(:cellnr:)
Fill up the jar with dry vermiculite to the top.
This layer hinders airborne contaminants reaching the underlying substrate in case they manage to come in during the inoculation and incubation.

(:cell width=350:)

(:cellnr:)
Take a 5inch(12cm) wide stripe of aluminium foil and fold it in the middle.
Put the foil over the opening of the jar as shown in the pictures. If you're using jars with metal lids, you can poke 4 holes at the very edge of each lid with a small nail and hammer and screw the lid on. The holes should be slightly bigger than the diameter of the syringe needle.

(:cell width=350:)


(:cellnr:)
Fold the foil edges up and press them together so you get a nice aluminium foil lid.

(:cell:)

(:cellnr:)
Then take a piece of foil measuring 5in x 5in in and put it over the first two layers (respectively the metal lid if you're using lids) leaving the edges of the foil reaching down, since it has to be lifted again during the inoculation.
So now you have 3 layers of foil over the opening. The top layer is lifted during the inoculation.

(:cell width=350px:)

(:tableend:)

====

Sterilization

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
Pour approximately 1inch (2.5cm) of water into the pressure cooker, don't put in too much water otherwise it will come into the jars and alter their water content.
Then stack the jars into the pressure cooker. The use of a rack to keep the jars from directly touching the bottom of the cooker is strongly recommended.
Put the lid on and bring the cooker to the required pressure (15 psi = 1atm over atmospheric pressure) slowly over a period of 15 minutes on a medium flame.

(:cell width=350px:)

(:tableend:)

If you heat up the cooker too fast this can cause the jars to crack.
As soon as the steam begins to escape the rocker or the vent at the top of the pressure cooker turn the heat back so only a very small, steady steam flow persists from the vent. From this point on, pressure cook for 45 minutes.
Depending on the pressure cooker model the cooking procedure works a bit different so if you're not familiar with pressure cooking consult the instruction manual or someone who used pressure cookers before.
After 45 min take the cooker from the flame and let cool for at least 5 hours or even better over night.
If you are unable to find or buy a pressure cooker, you can also sterilize the jars using a big pot with a lid.
In this case steam the jars for 1.5 hours in a pot lid on. Use only approximately 1 inch of water at the bottom.
You might have to add some water to the pot during steaming due to evaporation.
If you never have used a pressure cooker before check out this document about the correct pressure cooker use.

====

Inoculation

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
After the cooker is cold to the touch take the jars out and place them on a clean surface, have an alcohol lamp or a lighter and the spore syringe ready. Shake the spore syringe to break up the spore clumps.

(:cell width=350px:)

(:cellnr:)
To be able to shake it it's necessary that there is a small bubble of air in the syringe. If this is not the case, then you can suck approximately 1cc of sterile air into the syringe by placing the tip of the needle into the flame and slowly pulling the plunger back.

(:cell width=350px:)

(:cellnr:)
Loosen the foil from all of the jars so it can be lifted easily when you inoculate.

(:cell width=350px:)

(:cellnr:)
Take the cover from the needle and heat it over the flame until glowing red. Let cool for a few seconds

(:cell width=350px:)

(:cellnr:)
Take the upper foil layer off and put aside upside down.

(:cell width=350px:)

(:cellnr:)
Pierce the foil at the edge of the jar with the needle app. 1in(2.5cm) deep and inject the spore suspension towards the inner jar surface. You should see a small drop running down the inner surface of the jar towards the bottom. Each jar is inoculated on 4 equally spaced points. You should use 1 - 1.5 ml of the spore suspension per jar so one 10ml syringe is sufficient for 6 -10 jars.

(:cell width=350px:)

(:cellnr:)
Put the foil on again. Flame sterilize the needle again after inoculating 3 jars to prevent cross contamination just in case a jar wasn't properly sterilized.
When all of the jars are inoculated fold the foil edges up and press them firmly together so you get a nice aluminium foil lid. Write the inoculation date and the species/strain information on the foil with an all surface felt tip pen. If you touch something other with the needle during the inoculation procedure except the foil surface of the bottom foil layer immediately flame sterilize the tip again.

(:cell width=350px:)

(:tableend:)

====

Incubation

The jars should be stored at 21-27°C (70-81°F), the warmer the better, but not exceeding 27°C. If you don't have these temperatures at home you can build an incubatorars.

ars.

Incubator

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
The inoculated jars develop fastest if they are stored at a temperature of 27°C (80°F) (According to Stamets the best incubation temperature for P. cubensis would be 86°F, but since the jars themselves are a few degrees warmer than the surroundings (mycelium emits heat when growing) 80°F is a good and safe incubator temperature)

You can build an effective incubator by using two plastic boxes of the same size and an aquarium heater.
There are several types of aquarium heaters. When you´re buying a heater, make sure that it is of the "fully submersible" type.
Attach the heater to the bottom of the first box and pour in as much 27°C warm water that the heater is completely submerged.
Adjust the heaters thermostat so that the heater just shuts itself off at 27°C .
Put some spacers on the bottom of the box, they carry the second box and prevent it from touching the heater. In the above picture 4 jars are used. You could also use bricks, stones or something similar.

(:cell width=350px:)

(:cellnr:)
Put the second box in the one containing water.
After a few hours measure the temperature again and adjust the heater if necessary so the water temperature is 27°C.

(:cell width=350px:)

(:cellnr:)
When the box is empty, it will float on the water.
The water level in the lower box should reach app. 2/3 the height of the box, supposing the upper box is in place loaded with jars and resting on the spacers.

(:cell width=350px:)

(:cellnr:)
Now you can put the inoculated jars into the box.

(:cell width=350px:)

(:cellnr:)
Cover the jars with a blanket to keep the heat escaping and to keep the jars dark. Note: the water level drops in some weeks by evaporation. Therefore you have to fill some fresh water in from time to time to keep the water level high enough. Never let evaporate so much water that the heater isn´t submerged in water anymore! You can get all of the above items at www.ebay.com for a very good price.

(:cell width=350px:)

(:tableend:)

====
(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
Providing the jars are kept warm you should see the first sign of germination after 3-5 days as bright white specks. This is mycelium. If anything grows that is not white, for instance green, black or pink, then the jars are contaminated and their content must be discarded and your clean procedures need some improvement. After the jars are emptied and the jar is washed with detergent and hot water it can be used again.
Check the Shroomery Contamination FAQ for more information on possible contaminations in mushroom culture.

(:cell width=350px:)

(:cellnr:)
Depending on the temperature and the viability of the spore syringe it takes 14-28 days for the mycelium to colonize the whole jar. Once colonized store the jars at normal room temperature, about 21°C (70°F) to initiate pinning.
Don't expose the jars to direct sunlight. Indirect sunlight (= the natural light that lights up a room because at day time out) or a low wattage lamp (cool white fluorescent lamp is ideal, incandescent lamp is less suitable) for 4-12 hours a day is sufficient.

(:cell width=350px:)

(:cellnr:)
Within 5-10 days (with certain mushroom strains it can however take up to 30 days) pinhead-size accumulations of mycelium should form. These so called pins represent the beginning of mushroom growth. In the following days also small mushrooms with brown heads become visible. When this is the case it's time to birth the cake into the fruiting container where the mushrooms can develop to maturity.
Some strains don't easily develop pins. In this case put the colonized jar wrapped in a plastic bag in the fridge over night and then proceed to fruiting next day, even if the cake doesn´t show pins yet. This cold shocking usually helps trigger pinning somewhat.

(:cell width=350px:)

(:tableend:)

====

Fruiting

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
The fruiting of the cakes can be accomplished in any sort of container that can be loosely sealed and has at least one translucent side, preferably on the top. Suitable containers are a plastic bucket, rubbermaid container, terrarium, aquarium...
Put an 1/2 inch layer of moistened perlite or expanded clay pelets or even a wet paper towel at the bottom of the container and birth the cakes onto this layer by letting them slide from the jar upside down. Sometimes the cake doesn't slide out of the jar easily by itself.
You just need to turn the colonized jar upside down in your hand and slam the hand lightly against the palm of the other hand. This will make the cake slide against the lid and it can be birthed with ease.

(:cell width=350px:)

(:cellnr:)
If you have a bigger fruiting chamber (a bigger plastic container or a terrarium) you can of course put in more than one cake to fruit.
The distance between the cakes should be at least 2" (5cm) for the mushrooms have room to grow. Put a sheet of translucent plastic over the opening of the fruiting container. Take this sheet off once a day and fan the air out with a piece of cardboard. If the bottom layer begins to dry out, spray it with some water to keep it moist since this layer provides moisture for the air to stay very humid. Don´t spray the cakes directly.
Handle the cakes as little as possible but when you do it allways wash your hands thouroughly beforehand.
Over a course of the bext 7-14 days the cakes will begin to pin(if the haven't began to pin in the jars yet) and the small mushrooms will grow big in a matter of 2-5 days and as soon the caps begin to open they can be harvested.
This simultanious maturation of all mushrooms is called a flush.

(:cell width=350px:)

(:cellnr:)
After the mushrooms have grown big there are usually a few small, stunted mushrooms left over, they are called aborts. They can be recognized by their blackish heads and the fact that they stopped growing at some point. Still they are good to use unless they are rotten.

(:cell width=350px:)

(:tableend:)

It's crucial that you harvest all mushrooms, also the aborts, after the flush. This is most easily accomplished if you harvest the mushrooms off by gently twisting and tearing them off the cake with clean hands. Opti://www.mycotopia.net/://www.mycotopia.net/teks/dunktek.html | dunk]] the cakes after each flush, this can increase the flush size significantly.

(:table border=0 cellpadding=5 cellspacing=0:)
(:cell:)
After approximately one week small mushrooms begin to form again and mature during the next days.
This cycle can repeat itself up to 4 times sometimes even more. After that the cake is exhausted it produces no more mushrooms and can be discarded. They can be also used to start outdoor beds.

(:cell width=350px:)

(:cellnr:)
Sometimes green mold attacks the cakes even before they are completely exhausted. If this is the case remove and discard the contaminated cakes immediately to prevent the spreading of the contamination.

(:cell width=350px:)

(:cellnr:)
3rd flush:

(:cell width=350px:)

(:cellnr:)
4th and final flush:

(:cell width=350px:)

%0host:1134144605=85.12host:1134ost:1134144605=85.124ost:1134144605=85.124.200.83
Edit - History - Print - Recent Changes - Search
Page last modified on November 19, 2017, at 07:08 AM