The EROWID Perlite Humidification FAQ
version 1.0
12/12/97
by EROWID

INDEX

Disclaimer
This FAQ is presented for informational purposes only. We do not advocate illegal activities. We do believe in the right of the individual to have free access to information and ideas. We strongly recommend that the reader learn about applicable local and federal laws regarding possession, production, and sale of any mushrooms that they intend to grow whether using this or any other method. This FAQ is currently under construction. Please ask permission before creating additional permanent copies elsewhere.

Introduction
The theory behind the Perlite Humidification Technique is that instead of trying to humidify your growth chamber with a complex humidifier set-up...you use a layer of perlite to keep the humidity high. In addition to requiring less daily care, some people say the perlite method can sometimes provide up to 4 or 5 flushes. Many people seem to have great luck with this method! If you have any information about using perlite that isn't included here...please let us know.

What is perlite and how does it work?
Perlite is made of small pieces of extremely porous volcanic rock. When water is added, it is wicked into the tiny pores of the perlite. This porous structure then serves to slowly evaporate the water back into the air. The huge surface area in the micropores of the perlite helps the water evaporate forming a vapor of tiny droplets which tend to stay well in the air, as opposed to the bubbler and humidifier methods which have large droplets which tend to condense.

Health issues with perlite
Inhaling perlite dust is not recommended. Think of it as inahling tiny pieces of glass into your lungs. The problem is, when you buy a bag of perlite, it's often quite dusty. One good solution is to pour a bunch of water, about 10& of the volume of the perlite, into the bag when you first open it. This can significantly help reduce the dust levels. Some bags of perlite even have this suggestion printed on them.

Can I use Vermiculite instead of perlite?
Not recommended. Though some people have used vermiculite successfully, the perlite technique relies on the porous structure of perlite to work. Unlike perlite, Vermiculite actually absorbs water...and creates a big mush in your grow chamber. It's smaller surface area is significantly less efficient at re-releasing the water back into the air.

What do I do with the perlite?
Basically, you're going to cover the bottom of your grow chamber with a layer of wet perlite. The grow chamber should be fairly well sealed and shouldn't have any holes in it. Then, you put your fully colonized cakes in on top of the layer of perlite. The perlite should maintain just about the right level of humidity without any help. Other than daily airing of the grow chamber to reduce CO2 levels, there's very little maintenance with this method.

Is there a problem with contamination of the perlite?
An obvious concern with the perlite technique is sterilization. Intuitively, it just doesn't seem right that one would work so hard to make sure the grow chamber is sterilized correctly, and then dump a big wet pile of unsterilized perlite in the bottom. But generally, there don't seem to be much of a problem with contamination of the perlite.

Most people simply use perlite out of the bag, though some swear by boiling or baking the perlite first to sterilize it. It's also possible to add a small amount of liquid sterilizer to reduce contamination.

Hydrogen Peroxide
If you've tried the perlite method and had problems with contamination, or if you'd just like to be extra careful, you might want to try mixing a small amount (.5% solution) of Hydrogen Peroxide into the water. In theory, this low level is enough to help reduce contamination in the perlite layer, but isn't enough to hurt the mycelium since the cakes aren't in direct contact with the liquid. Some people suggest pouring the hydrogen peroxide directly onto the perlite layer before adding the cakes, but I might recommend mixing it directly with the water before adding the water to the perlite so there's no change of the cakes coming directly into contact with any significant amount of the hydrogen peroxide. Either method should work fine.

Chlorine
Though many people recommend using bottled water in order to keep your grow chamber as sterile as possible, others suggest that using tap water adds just enough chlorine into the system to keep unwanted contamination down. You could possibly get the best of both worlds by using bottled water and adding a tiny amount of chlorine bleach to it. This seems to be a matter of personal preference. Whichever works for you.

How much water do I add to the perlite?
There are 2 slightly different methods you can use. The first is to put about 1.5 inches of perlite in the bottom of your grow chamber then add about 1/2-3/4 inch of water. The water level needs to be well BELOW the top of the perlite. Only the perlite that is exposed to the air will wick up the water and release it into the air over time.

The other method is to put your perlite in a big bowl and add water. You want the perlite to be pretty wet, without having any extra, so fill then pour off the excess. Once the perlite is wet, cover the entire bottom of the grow chamber with a 1.5-2 inch thick layer. With this method, some people like to place thin layers of dry perlite under and on top of the wet perlite layer.

With either method, as the perlite dries, you can occasionally add a bit more water (weekly or so). You should add just enough to keep the perlite wet, but not enough to create any standing water which would increase the chances of contamination. Be careful not to overfill.

Can I put the cakes directly on the perlite?
Your cakes can sit either directly on the perlite layer, or they can be placed on something like upside-down mason jar lids (including the ring). There's no real agreement as to which is best, but there are a few issues to consider when deciding which method to use :

Directly on perlite
It's theorized that some amount of water is fed directly into the cake through absorbtion if the cake is placed directly on the perlite. Some think this may increase contamination, but others say the only noticeable effect is that the mushrooms growing near the base of the cake will often be a bit bulbous and overly wet (sometimes this only happens on the 2nd or 3rd flush), though this is also where some people find the largest mushrooms growing. Cutting the wet mushrooms in half before drying will help with this problem.

On lids
Growing on lids will prevent direct contact between the cakes and the perlite. If you're using hydrogen peroxide and you're worried about the mycelium being hurt, lids may be in order. If the cakes are being grown on lids, you can remove the lids after one or two flushes, or at any point that the cakes seem too dry, in order to get a humidity boost. Others recommend removing the lids for a few days after each flush in order to rehydrate the cakes.

Temperature
Just as with most growing methods, the temperature in your grow chamber should be between 70-80 degrees.

Humidity
Humidity should be as high as you can get it without causing standing water on the cakes. You'd like to be above 95% humidity. If the humidity is too low, you may have problems getting the mycelium to flush, and also may see mycelial growth on the mushroom itself.

CO2 Reminder
Make sure to open your grow chamber and fan it out frequently to disperse excess CO2. Some people do this a couple of times a day and others once every few days.

How long before I can harvest?
After fully-colonized cakes are birthed onto the perlite layer, it will take 1-2 weeks for the cakes to pin and then another week or so until the mushrooms are ready to harvest.

You can keep the same perlite in the grow chamber for as long as the cakes continue flushing. Once your cakes are finished flushing, and before adding new cakes, clean and disinfect the grow chamber and use new perlite.

Other perlite options

Small Perlite Shroomariums
If you're using the PFTek formula (rice flour and vermiculite), instead of a using a large humidified aquarium, try making individual shroomariums. Each one is a gallon jar with 1/2" of wet perlite at the bottom. When the cake is ready to be birthed, it is placed in the jar on a plastic lid or something similar.

This method may not yield quite as many or as large shrooms as a fancier, larger, more expensive setup, but it should be more than adaquate for most appetites. This may still benefit from an occasional misting from a spray bottle, but is otherwise pretty maintenence free.



Grow Mushrooms from Spores
PF-Tek for Simple Minds PF-Tek voor de gewone man | La PF-Tek pour les nuls PF-Tek für einfache Gemüter | PF-Tek απλ?ς λογικ?ς | PF-Tek Senza Fatica | PF-Tek iesacejiem | PF-Tek Paprastoms Mintims | PF-Tek for Lavpanner | PF-Tek pentru oameni simpli | PF-Tek na jednostavan nacin | PF-Tek za telebane | PF-Tek para Mentes Simples | PF-Tek för latmaskar |
Laminar Flow Hood - Build a HEPA filter flowhood | Hotte de ventilation laminaire - Construire une hotte avec un filtre HEPA |
Psilocybe azurescens outdoor cultivation | Culture extérieure du Psilocybe azurescens | Psilocybe azurescens buitenkweek |
Grain for Simple Minds | Graan voor de gewone man | Método para torpes de preparación de grano | Granaglie Senza Fatica | Le Grain pour les nuls | Grudai? |
Importance of Gas Exchange | Het belang van gaswisseling | Oro kaitos svarbumas | L’Importance des Échanges de Gaz |
Polyfil filter lid for Simple Minds | Polyfil filterdeksels voor de gewone man | Polyfill for Simple Minds italiano | Método para torpes de elaboración de filtros de fibra de poliéster | Dangtelis su filtru | Couvercle avec filtre Polyfill pour les nuls |
Pouring Agar for Simple Minds | Agar uitgieten voor de gewone man | Versare l'Agar Senza Fatica (...e senza condensa) | Método para torpes de llenado de placas petri con agar | Couler l’Agar pour les nuls |
Cloning for Simple Minds | Klonen voor de gewone man | Método para torpes de clonación de setas | Le clonage pour les nuls | Clonagem para Mentes Simples | Klonavimas |
Pressure cooker test | Snelkookpan test | Test della pentola a pressione | Test para comprobar el correcto funcionamiento de ollas a presión | Teste para a Panela de Pressão | Test de cuiseur sous pression |
Pressure Cooker Use |
Homemade Tyvek filter discs test |
Mycelium Inoculation Technique | Technique d'Inoculation de Mycélium |
Casing PF-Cakes | Het Bedekken van PF-Cakes | PF-Tek pyrageliu aptaisymas | Casing pour gâteaux PF-Tek | Casing pentru prajituri PF