millet

Started by enno, July 30, 2008, 07:33:45 AM

Previous topic - Next topic

enno

do i have to soak the millet overnight b4 simmering?
asking because it doesnt tell in "teks"
and is millet a good substrate for amazon strain

thanks alot

Baphom3t

Yes you soak millet.
Soak for 24 hours.
All cubes are grain lovers.

Baph


enno

thanks man, will do . :mellow:

enno

should i dunk them after they fully colonized?

Baphom3t

No.
Dunk after 1st flush

Baph


enno

thanks again baph  :)

enno

lets say i want to case them,than should i dunk b4?

Baphom3t

No.
You dunk after the 1st flush.

Don't confuse grains with BRF.

Baph


enno

but can you case grain? and if possible than how can you dunk after casing?

Baphom3t

Yes you can case grain.
Have a look at this pic.
http://i16.photobucket.com/albums/b30/BAPHOM3T_666/day6-1.jpg
See the tray?
Fill it with distilled water.
Let it set overnight.(I use a cooler to set my trays in)
Drain the water from the tray/s.
Then back in the FC for another flush :D
Hope that helps! :)

Baph


enno

what tray? the aluminium container? how do you drain the water from that,do you drain holes in them?
sorry for all the Q but i want to get it right.

thanxxxxxxxxx

Baphom3t

Yes the container.
After the 1st flush the mycellium has a tendency to eat at the tray and some water will come out.
But if it doesn't then take your hand and place it on the sub and tilt the tray till the water runs out.
You will want to wear a plastic glove on the hand that holds the sub.
Make sure it's sterile of course :)
Drain the water then toss it back in the fc.

When the trays get the "holes" from the myc in them you will need a container to put the trays in while you dunk them.
Thats why I use a cooler.
Even if the Myc eats at the tray you will still need to drain the excess water out from the dunk.

Baph


enno

thanks for all the info baph
:)