Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Waldarbeiter

#1
General topics / Re: Flowhood
March 27, 2008, 01:00:57 PM
Hey folks,

I just ordered a blower which I intend to use for constructing my own laminar flowhood.

Specifications (Model R2E190-A026-55, ebm Papst):
air volume 570 m³/h
Schalldruckpegel  62    dB(A)   <--- is this the static pressure?

I am not sure whether or not this blower suffices for building a flowhood ????

Thanks alot for any helpful comments,
W



What followeth is the technical information, in German:
Technische Daten
     
Spannung    230    ~ VAC
Frequenz    50    Hz
Volumenstrom    570    m³/h
Drehzahl    2500    1/min/2700
Leistungsaufnahme    58    W/75W
Stromaufnahme    0.26    A/0,34A
Kondensator Kapazität    2.0 / 400    uF/V
Schalldruckpegel    62    dB(A)
Umgebungstemperatur 50Hz    -25 .. 50     °C
Material Lüfterrad     Kunststoff PA 6.6
Lagerung    wartungsfreie Kugellager
Drehrichtung    rechts, auf Rotor gesehen
Anzahl Lüfterradschaufeln      7
Kabelausführung    variabel
Einschraubtiefe    max. 5 mm
Betriebsart    S1
Isolationsklasse    "B"
Schutzklasse    I
Schutzart    IP 44
Motorschutz    Temperaturwächter
Gewicht    Temperaturwächter




edit:
The HEPA Filter I am gonna use is a 
240-03050610-M078E080
HS-Mikro SF, Gr.:305x610x78 mm, EN 1822 Kl. H14"