Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - anti-babylon

#1
PF - Tek / SO frustrated...please HELP
September 16, 2012, 05:37:52 AM
Hi my friends..
I'm writing here because I'm gettin so frustrated from this..

Time ago i tried my first brf cake experience , and it goes great. lot of shroom and 6/on 7  good cakes so i was happy, iv made my own print spore and collect them.

after a while i tried more brf cakes with my print spore, but germination seems to be decrease brutally..
i think is normal due to the fact that I'm new to this and also i can get some bacteria inside (infact in that period i had more wasted jar) and also very few mushroom from the ''good cakes''

now from a while....I'm gettin NOTHING and i mean nothing , no white micelium , no mold...just fucking nothing
and I'm doing this like iv did it the first time... i also tried some more  spore syringe from the shop that suppose to work....and just nothing...i also made an incubator for leaving it at right temperature !!! (27 Celsius) but still nothing....

what do you suggest? is maybe the concentration of clore in the tap water?
is maybe that i let the cake sterilize just for 50 minutes (just with vapor, i didn't have a pressure cooker, nut i get no mold so i don't think is this)
maybe theres too little spore in my syringe? (i see them very black so i don't think this is the problem too)
maybe they are already dead by leaving them in the fridge for month?

I'm getting crazy and frustrated...please help!!
#2
Cultivation / growing outdoor - general info -
May 07, 2012, 12:45:39 PM
hi There evrybody! how is going?

im back for questioning some stuff.......also im going good with pf tecks but i want to encrease my yeld by growing outdoor.

I have read the guide of this site and it says that for grow externally is prefere the PSYLO AZAURENCIS (or similar  i forgot the spelling :3 )

so my question is , and if i try with some colonizated popcorn (or pf cakes) of cubensis equadorian?  willit grow?

where i live in winter temperature can reach also -22........................this winter .. fuck off it kill also several plants... :(

thanks in advance for answering!
#3
PF - Tek / can temperature kill spores?
November 23, 2011, 12:25:28 PM
hi there guys!

i see that the temperature in the incubator its rising (at the hottest point of the day ) at 33 ° celsius....

im wondering when spore get killed by hot temperature.....??
i have to find a way to lower that....

thanks in advance!

bye
#4
PF - Tek / 2 weeks old Cake that smell bad...?
September 08, 2011, 07:13:17 AM
hi guys,

I'm back and i have a simply question for you pf cake runners.

i was leaving for my holiday but i had notice that at that time my 2 jars were already full colonized , but i have to leave for 2 weeks so i remember somebody saying that ( iv read it on this forum) you can leave jar fully colonized also for longer time.

so i left from my home for the two weeks and when i come back i immediately start the process of rehydratation and i stuck them in the box with 100% humidity , today after 2 days i was waiting for pinning like crazy but i found nothing and also i found some groce smell come out from the cake i think.

Cake are regular, i mean no sign of infection or strange thing....maybe they need more days of rehydratation? that maybe becouse i left it more days in the jar.

you can tell me your opinion.
thank you very much for support

bye


#5
PF - Tek / what to do with liquid colture
June 10, 2011, 08:11:37 AM
hi guys !


some month ago i have tried do do some liquid culture and today opening tha wordrobe i have seen that the liquid in the jar is quite colonized , you can see different ''clouds'' of micelium around the liquid and i think they are gettin bigger with time.

can i use that LC to inoculate directly my pf jars?
and if it yes how much i have to inoculate x jar?

do i might have problem with sucking the white cloud into my syringe?

tbanks in advance!
#6
PF - Tek / white fluffy mould....Verticillium??
May 04, 2011, 09:34:33 AM
hi there ....i haved incoluated some times ago, some little jar with a syringe of ecuadorian...


i haved wait but this times something wrong its start to growth.

it SEEMS like white micelium but if u look better is more gray than white the color and it seems to be much more fluffy stuff..
i dont know what this is , by  a quick search on the web it could be some with mushroom mould that its called Verticillium

anybody knows something?

i cant post photo if u want

thanks in advance
#7
PF - Tek / from spore to syringe _something wrong_
February 02, 2011, 03:00:13 AM
hi there evrybody

i ahve tried to make some spore prints i followed all the istructions and rules on shroomery then i store them in a wardrobe with no light in a plastic bag.

i have made 2 spore siringe by using 2 stamps that i have made , then left it for one night in the fridge all stearealized well like guide says.

but now at near one week after the injection i stil can see nothing grow. what i did wrong?
maybe also spore have to be maintend in the fridge??

please help
thanks!
#8
General topics / Ecuadorian...!
January 05, 2011, 08:30:59 AM
hi guys,

this is my first expierence like grower and like ''taker''
i never tried before...

just wanna ask you if ecaudorian are stronger of other strain.
i wanna take one gram to begin. never had it before.

also im on antibiotic becous of my bronchitis , do you think its a good idea to take it with it?
#9
Cultivation / 2 test with micelium__will work?
December 22, 2010, 09:03:26 AM
hi guys!

i have a question for you,
few days ago i was crumbling some pf cake to case them and i save two piece of micelium for test some thing

1 - have put a piece with some rice (already sterilized and added water)
2 - the other piece i put it with some vermiculite already treated with some brown rice flour and also sterilized

can this mycelium contaminate ?
just testing.. :rolleyes:
#10
PF - Tek / anti babylon...set...raedy..go!! (with pics)
December 02, 2010, 06:43:43 AM
OK hi everybody....im nearly ready to begin my terrarium. today im gonna buy some perlite to put inside the terrarium and some pit moss to try to case ONE of my brf cake.

Any advice is welcome here you can see the picture of my terrarium
by the way it has 2 big hole as you can see because at the beginning it was thought like a glove box just to use it for inoculate the jars.
#11
PF - Tek / temperature question
November 18, 2010, 02:10:46 AM
Hi to all !

iv been searching on the site but im not lucky,

i have my jars inoculated and sitting in a polyester box that i have put on the radiator in my room , the problem is that i have notice now after 4 days from inoculation that at night the radiator is going off, becouse the heating is not mine but central located for all the condominians (if i say it right)
so the temperature inside the box at night is going down to 26° degree celsius instead of the normal 30° that i have in the day.

is this oscillating temperature gonna cause me some problem or some slowing down process in colonizing the jar?

thank you very much so helpfull
#12
PF - Tek / jar storage
November 23, 2008, 03:04:45 PM
hi guys i have inoculated 7 glass with a spore sirynge made by me off hawaian spore.
The question his : i have put the glass into a plastic box and then on my radiator. i also have put a
termometer that calculate the temp. INSIDE the box and outside the box
So i have cheked the temp. after a few hours and was 27 in e 31 outside .
My doubt is that,  the AIR temperature is 27 inside , but the real temperature is way too high becouse the glass jar , (i havd touch it) are ,i think, too hot....and they are seat on the hot plastic.
what did you think about it?

Thanks in advance
bye!
#13
PF - Tek / question syringe
November 05, 2008, 12:08:09 PM
Hi guys i have this print spore of hawaian mush.. its like 1,5 cm x 1, 5 cm its enough for a syringe of 10 ml? 
And then another question when you do your self syringe you use the glovebox or the oven?
becouse i dont have a glovebox and i think that if i will use my oven its even worst....its so dirty.....
im waiting for your response! thank you in advance!!
#14
PF - Tek / DIY - Syringe question
November 05, 2008, 12:05:51 PM
Hi guys i have this print spore of hawaian mush.. its like 1,5 cm x 1, 5 cm its enough for a syringe of 10 ml? 
And then another question when you do your self syringe you use the glovebox or the oven?
becouse i dont have a glovebox and i think that if i will use my oven its even worst....its so dirty.....
im waiting for your response! thank you in advance!!
#15
PF - Tek / question on make syringe by yourself..
November 05, 2008, 12:02:04 PM
Hi guys i have this print spore of hawaian mush.. its like 1,5 cm x 1, 5 cm its enough for a syringe of 10 ml? 
And then another question when you do your self syringe you use the glovebox or the oven?
becouse i dont have a glovebox and i think that if i will use my oven its even worst....its so dirty.....
im waiting for your response! thank you in advance!!
#16
PF - Tek / second try out....after first going wrong.
October 02, 2008, 08:12:35 AM
hi guys im going to try out onother time to coltivate mush after the first time that i didt wrong....i only get one jar of ....mold! shit....
anyway i think that the first time i get some germ in it and i also go wrong with the proportion of substrate....
now im tryng to do it better...
i will start from one buy syringe (i think for one jar)
and one syringe that i will do with some print spore....my question is what kind of syringe i have to use? my print is something like      1.5 CM x 1.5 CM  .....
i wait for your response thanks guys
#17
hi guys im going to try out onother time to coltivate mush after the first time that i didt wrong....i only get one jar of ....mold! shit....
#18
PF - Tek / question about micelium
August 04, 2008, 05:40:48 AM
hola guys i v just inoculated about 5days ago some jars...
with some very old spore i think...its there any possibility that the spore have running out their effective life time?
i just left them in the sirynge about 12 hours or more before incoluating for rehedrytating them .
but now only one of my jar has stardted to make some white stuff...
the only thing its that it doesnt look like the micelium showned in the pf tek guide...
it seem to be more puffy you now?
i mean less hard and also fluffy.

its a good thing or a a bad thing?
hope i was clear enough.
thank you guys let me know im impatient!
#19
Cultivation / hunting outdoor
August 01, 2008, 12:26:37 PM
 hi guys jst wanna ask if someone of this mushroom are good to eat if you might know. butr when ai attached the photo its just tell me that an error is occured Cannot access attachments upload path!

what it mean?
the photo are .jpg 68kb

thanks
#20
PF - Tek / rye flour thickness
July 29, 2008, 09:31:34 AM
hithere evrybody iv just prepared my substrate and seen thath is not like the substrate that you can see in internet when your using the brf

i have used the rye flour becouse is the only thing that i can find but it seem to be more thick when i was lookin it...
also when i put it in the glass i was tryng to make it more losley...
but i dont know how this is gonna be ....
did i have waste my time or wat?
i have to inoculate tommorow

thank in advance
bye