Fungifun - Forum

Mushroom cultivation => PF - Tek => Topic started by: axis on April 11, 2007, 07:21:56 PM

Title: "Q" about aluminum foil and lids
Post by: axis on April 11, 2007, 07:21:56 PM
Let me get this straight. after dumping the substrate mixture in the jar, cover with aluminum foil, and then the lids with the holes on top of that, and next, the ring and tighten all together? Or is it, the lids with holes and tighten with rings then cover with aluminum. Too many TEK's I think.
Title: Re: "Q" about aluminum foil and lids
Post by: psilocybin warrior on April 11, 2007, 08:10:03 PM
do it which ever way you think more water will not get into the jars during steralization
Title: Re: "Q" about aluminum foil and lids
Post by: anno on April 12, 2007, 08:09:51 AM
Either 2 layers of foil(without holes), or a lid with 4  holes and a layer of foil atop of that.
See http://www.fungifun.org/English/Pftek
Title: Re: "Q" about aluminum foil and lids
Post by: frily17 on June 30, 2009, 11:19:12 PM
Aluminum foil is aluminum prepared in thin metal leafs, with a thickness less than 0.2 mm / 0.008 in, although much thinner gauges down to 0.006 mm are commonly used. Foils are commonly gauged in Mils.





_________________
copper sinks (http://www.circlecitycopperworks.com)


Title: Re: "Q" about aluminum foil and lids
Post by: psilocybin warrior on June 30, 2009, 11:44:40 PM
lol. and lol again cuz this post is like 2 years old.

PW
Title: Re: "Q" about aluminum foil and lids
Post by: shroomzer on July 01, 2009, 07:07:51 AM
Gotta love it!  At least people are reading ... lol
Title: Re: "Q" about aluminum foil and lids
Post by: malabar on July 01, 2009, 07:42:31 AM
  Be proud that your brethren Can read!  lol

     :mellow: