Hey folks,
I just ordered a blower which I intend to use for constructing my own laminar flowhood.
Specifications (Model R2E190-A026-55, ebm Papst):
air volume 570 m³/h
Schalldruckpegel 62 dB(A) <--- is this the static pressure?
I am not sure whether or not this blower suffices for building a flowhood ?
Thanks alot for any helpful comments,
W
What followeth is the technical information, in German:
Technische Daten
Spannung 230 ~ VAC
Frequenz 50 Hz
Volumenstrom 570 m³/h
Drehzahl 2500 1/min/2700
Leistungsaufnahme 58 W/75W
Stromaufnahme 0.26 A/0,34A
Kondensator Kapazität 2.0 / 400 uF/V
Schalldruckpegel 62 dB(A)
Umgebungstemperatur 50Hz -25 .. 50 °C
Material Lüfterrad Kunststoff PA 6.6
Lagerung wartungsfreie Kugellager
Drehrichtung rechts, auf Rotor gesehen
Anzahl Lüfterradschaufeln 7
Kabelausführung variabel
Einschraubtiefe max. 5 mm
Betriebsart S1
Isolationsklasse "B"
Schutzklasse I
Schutzart IP 44
Motorschutz Temperaturwächter
Gewicht Temperaturwächter
edit:
The HEPA Filter I am gonna use is a
240-03050610-M078E080
HS-Mikro SF, Gr.:305x610x78 mm, EN 1822 Kl. H14"
I just ordered a blower which I intend to use for constructing my own laminar flowhood.
Specifications (Model R2E190-A026-55, ebm Papst):
air volume 570 m³/h
Schalldruckpegel 62 dB(A) <--- is this the static pressure?
I am not sure whether or not this blower suffices for building a flowhood ?
Thanks alot for any helpful comments,
W
What followeth is the technical information, in German:
Technische Daten
Spannung 230 ~ VAC
Frequenz 50 Hz
Volumenstrom 570 m³/h
Drehzahl 2500 1/min/2700
Leistungsaufnahme 58 W/75W
Stromaufnahme 0.26 A/0,34A
Kondensator Kapazität 2.0 / 400 uF/V
Schalldruckpegel 62 dB(A)
Umgebungstemperatur 50Hz -25 .. 50 °C
Material Lüfterrad Kunststoff PA 6.6
Lagerung wartungsfreie Kugellager
Drehrichtung rechts, auf Rotor gesehen
Anzahl Lüfterradschaufeln 7
Kabelausführung variabel
Einschraubtiefe max. 5 mm
Betriebsart S1
Isolationsklasse "B"
Schutzklasse I
Schutzart IP 44
Motorschutz Temperaturwächter
Gewicht Temperaturwächter
edit:
The HEPA Filter I am gonna use is a
240-03050610-M078E080
HS-Mikro SF, Gr.:305x610x78 mm, EN 1822 Kl. H14"