Hey Anno,
I read between you and baph - did I understand that rh needs to be high, near 100, for a wbs trays during pinning and after pinset, lower rh to low 90's? Is that right?
ALSO, today I pathced my bulk casing and do I now drop temp and maintain high rh (just as with the wbs tray)? The container is too large for a fc, so do I cover top of it w/ clear plastic or plexiglass with holes for gas exchange and fae often or cover w/ no holes in and fae?
Thx in advance for all your assisatnce
>did I understand that rh needs to be high, near 100, for a wbs trays during pinning and after pinset, lower rh
> to low 90's? Is that right?
Right.
Read http://www.shroomery.org/5230/What-do-I-do-after-applying-the-casing-layer
>ALSO, today I pathced my bulk casing and do I now drop temp and maintain high rh (just as with the wbs
>tray)? The container is too large for a fc, so do I cover top of it w/ clear plastic or plexiglass with holes for gas
> exchange and fae often or cover w/ no holes in and fae?
Again, http://www.shroomery.org/5230/What-do-I-do-after-applying-the-casing-layer
PERFECT! Told me what I needed to know! (Wish i could have found this when I tried searching).
Thx anno!